Materials · 3 min read

Class 4 impact-resistant shingles: are they worth it in New Mexico?

What a Class 4 rating means, how impact-resistant shingles hold up to Albuquerque hail, what they cost compared with standard shingles, and how to ask your insurer about a discount.

Hail is the reason a lot of Albuquerque roofs get replaced early. Impact-resistant shingles are built to take those hits better than standard ones. Whether they are worth the extra money depends on your roof, your insurer and how long you plan to stay.

What the rating means

Shingles are tested under a standard called UL 2218. Steel balls of increasing size are dropped onto the shingle, and it passes a class if it does not crack through. Class 4 is the highest: a 2-inch steel ball dropped from 20 feet. Most standard architectural shingles do not carry an impact class at all.

Manufacturers reach Class 4 in two main ways: a polymer-modified asphalt that flexes instead of cracking, or a reinforced backing. Polymer-modified shingles also tend to hold their granules better in heat, which matters at our altitude.

What they do and do not do

They resist the bruising and cracking that lets water into the mat after a storm. They can still lose some granules and show cosmetic marks, and very large hail will damage any roofing material. Think of the rating as raising the size of storm your roof can take, not removing the risk.

Cost

Impact-resistant shingles cost more than standard architectural shingles. The labor is the same, so the difference is in material. Your written proposal can show both options side by side so you can see the real number for your roof.

The insurance question

Some insurers offer a premium discount for a Class 4 roof. Before you count on it, ask your agent three things:

  • Is there a discount, and how much?
  • What proof do you need? Usually an invoice or a certificate from the installer.
  • Does accepting the discount change how cosmetic hail damage is covered?

That last one matters. Some policies pair the discount with a cosmetic damage exclusion, which means dents that do not cause leaks are not covered.

The four impact classes

UL 2218 has four classes, each tested with a larger steel ball: 1.25 inches for Class 1, 1.5 for Class 2, 1.75 for Class 3 and 2 inches for Class 4. A shingle earns the class if the back of it shows no crack after two hits in the same spot. Class 3 products exist, but most insurer discounts are tied to Class 4.

Two caveats are worth knowing. The test is run on new shingles at room temperature. Asphalt gets more brittle as it ages and dries out, so a fifteen-year-old impact-rated roof will not perform like a new one. And the rating covers the shingle, not the whole roof. Soft metal vents, skylights, swamp cooler housings and gutters still dent, and solid decking under the shingle matters because a shingle over a gap or a soft spot cracks more easily.

What to ask your roofer

  • Is this product rated Class 4 under UL 2218, and can I have the documentation for my insurer?
  • Does the ridge cap carry the same rating? A standard ridge cap on an impact-rated field is a common shortcut.
  • What underlayment and decking repairs are included?

Who should consider them

They make the most sense if you plan to stay in the home for years, if your neighborhood has been hit more than once, or if your insurer rewards them. On a house you are selling next year, the standard shingle may be the better value.

We can price both on your free inspection and bring samples. Our shingle roofing page covers the rest of the system.

See your own roof measured. Type your address — explore an aerial roof measurement and request a free inspection. Your written price follows the inspection.
Start my roof plan
FAQ

Questions about this topic

Do Class 4 shingles look different?

No. They come in the same architectural profiles and colors as standard shingles. The difference is in the mat and the asphalt blend.

Will a Class 4 roof still need replacing after a big hailstorm?

It can. Very large hail damages any roof. The rating means the shingle resists the size of impact used in the test, which covers most storms.