Hiring · 3 min read

Roof warranties explained: manufacturer vs. workmanship

A new roof comes with two different warranties. What each covers, what voids them, and the questions to ask before you sign.

Warranty language sells a lot of roofs, and most homeowners never read the document. There are two separate warranties on a new roof, and they cover different things.

The manufacturer warranty

This comes from the company that made the shingles or membrane. It covers manufacturing defects: material that fails when it was installed correctly.

Things to look for:

  • The coverage period and how it changes. Many warranties give full coverage for an initial period and prorated coverage after that.
  • What is covered. Materials only, or materials and the labor to replace them.
  • System requirements. Enhanced warranties often require the manufacturer’s own underlayment, starter and ridge products, installed by a contractor in their program.
  • Registration. Some upgrades must be registered within a set time after installation.

The workmanship warranty

This comes from the contractor. It covers the installation: flashing, fastening, sealing and details. A leak in the first few years is far more often an installation issue than a material defect, so this is the warranty you are most likely to use.

It is only as good as the company standing behind it. Ask how long it runs, what it covers, and how to make a claim. Then ask yourself whether the company will be reachable when you need it.

What can void a warranty

  • Inadequate attic ventilation (see our ventilation post)
  • Installing over an existing roof where that is not allowed
  • Unapproved alterations, such as a satellite dish or solar mounts put through the roof by someone else
  • Pressure washing, or walking damage

Questions to ask before you sign

  1. Which manufacturer warranty comes with this proposal, and is there an upgrade?
  2. Who registers it?
  3. What is your workmanship warranty, in writing?
  4. What is excluded?
  5. Does either warranty transfer to a buyer?

What to keep in your records

When the job is done, put these in one folder, paper or digital:

  • The signed contract and the written scope of work
  • The exact product names, lines and colors installed
  • The permit and the final inspection sign-off, where one was required
  • Warranty documents and confirmation of any registration
  • Completion photos, including the decking and underlayment before the roofing went on
  • The final invoice marked paid

You will want that folder in three situations: a warranty claim, an insurance claim after a future storm, and the day you sell the house. A buyer’s inspector and a buyer’s insurer both ask how old the roof is and who installed it, and paperwork answers faster than memory.

How to make a claim

Start with the contractor. Describe the problem, send photos, and ask for an inspection. If the cause is workmanship, the contractor fixes it under their warranty. If it looks like a material defect, the contractor documents it and helps file with the manufacturer, who may send their own inspector. Do not have someone else repair the area first, because that can complicate either claim.

Our approach

Zenith is an Owens Corning Preferred Contractor. Ask us for the current warranty documentation for your project, and we will go through it with you before you sign. Start with a free inspection, or read how to choose a roofing contractor.

See your own roof measured. Type your address — explore an aerial roof measurement and request a free inspection. Your written price follows the inspection.
Start my roof plan
FAQ

Questions about this topic

Does a roof warranty cover hail damage?

No. Storm damage is an insurance matter. Warranties cover defects in materials or installation.

Does the warranty transfer if I sell the house?

Some do, often once and within a set period, and sometimes with a fee or a form. Check the warranty document for the transfer rules.